DRAGO

Dia-Rollex 800 Ø 115 x 140 mm M14
Compare

WORKABLE MATERIALS: Granite / Sandstone

Dia-Rollex Ø115x140/800 is a tool with a diameter of 115mm and a width of 140mm. It can be installed to Drago to produce 800-grain-size rolling finish on granite and sandstone. Thanks to the right ratio between rpm and forward speed, the workmanship maintains all the prerogatives of the manual one. The Dia-Rollex installed to Birba or to an angle grinder, together with a protection for tool ø115mm, allows the operator to produce 800-grain-size rolling finish manually on granite and sandstone.

Achievable finishes:

Rolling grain 800
Combed grain 800

Rotation speed:

Max 2.000 RPM

Tool diameter:

ø 115x140 mm

Mass:

3.3Kg

Technical documents:

Tool sheet IT-ENTool sheet ES-PT

Application:

With an automatic machine, screw Dia-Rollex /800 Ø115x140 onto the threaded shaft of Drago and, once the rotation speed has been reduced according to the maximum feed speed of the bridge saw, work it laid on the slab proceeding in both directions. Producing the combed finish, on the other hand, does not require a reduction in rotation speed. For manual workmanship, Dia-Rollex /800 Ø115x140 is screwed onto the threaded shaft of the Birba or angle grinder with variable RPM and worked laid on the slab in longitudinal passes without stopping. M14 or 5/8" attachments are available, depending on the grinder on which they are mounted.

    Contact us

    For any further information about Dia-Rollex 800 Ø 115 x 140 mm M14 or our tools, where to find them and our services, including support, please contact us at any time by filling in this form and sending it to us

      This site is protected by reCAPTCHA and the Google Privacy privacy and Terms of Service apply.