Concreta Compensation 9/20 ø 420 mm
Compare

WORKABLE MATERIALS: Concrete / agglomerates

Concreta Compensation 9/20 ø420 is a tool with a diameter of 420mm for floor polishing machines made of 6 20-bits rollers for bushammering finish on concrete, agglomerates and stone flooring. The bushammering finish obtained with Compensation 9/20 meets the best antiskid and slip resistance requirements even in adverse weather conditions. Different couplings are available depending on the type of polishing machine on which it has to be installed.

Achievable finishes:

Medium bushammering

Rotation speed:

2.000 Giri/min. max

Tool diameter:

ø 420 mm

Mass:

16Kg

Technical documents:

Tool sheet IT-EN

Application:

Concreta Compensation 9/20 ø420 can be fixed on floor polishing machines for rough finishes, whose plate has a dimeter of 420mm. Different couplings are available depending on the type of polishing machine on which they have to be installed. Attach the tool to the polishing machine's hold plate, then work it like a normal polishing tool, according to the parameters in the instruction booklet.

Strengths:

Material removal is possible thanks to rollers that can be mounted to remove concrete in chips. With the achievable finishes| the best antiskid and slip resistance requirements are achieved even in wet conditions.

    Contact us

    For any further information about Concreta Compensation 9/20 ø 420 mm or our tools, where to find them and our services, including support, please contact us at any time by filling in this form and sending it to us

      This site is protected by reCAPTCHA and the Google Privacy privacy and Terms of Service apply.