DRAGO

Dia-Roker Ø 115 x 105 mm 5/8"
Compare

WORKABLE MATERIALS: Granite / Sandstone

Dia-Roker Ø115x105 is a tool with a diameter of 115mm and a width of 105mm. It can be installed to Drago to produce 2000-grain-size rolling finish on granite and sandstone. Thanks to the right ratio between rpm and forward speed, the workmanship maintains all the prerogatives of the manual one. The Dia-Roker installed to Birba or to an angle grinder, together with a protection for tool ø115mm, allows the operator to produce 2000-grain-size rolling finish manually on granite and sandstone.

Achievable finishes:

Rolling grain 2000

Rotation speed:

Max 2.000 RPM

Tool diameter:

ø 115x105 mm

Mass:

3Kg

Technical documents:

Tool sheet IT-ENTool sheet ES-PT

Application:

With an automatic machine, screw Dia-Roker Ø115x105 onto the threaded shaft of Drago and, once the correct number of revolutions has been set up according to the maximum feed speed of the bridge saw, work it laid on the slab proceeding in both directions. For manual workmanship, Dia-Roker Ø115x105 is screwed onto the threaded shaft of the Birba or angle grinder with variable RPM and worked laid on the slab in longitudinal passes without stopping. M14 or 5/8" attachments are available, depending on the grinder on which they are mounted.

    Contact us

    For any further information about Dia-Roker Ø 115 x 105 mm 5/8" or our tools, where to find them and our services, including support, please contact us at any time by filling in this form and sending it to us

      This site is protected by reCAPTCHA and the Google Privacy privacy and Terms of Service apply.